Site vision
This is rail R4, Site vision. See all rails. Cameras count vehicles and objects, never people. Video stays on the site box and only numbers leave.
Where a camera goes · Site’s own names · The site box’s page
CAM-GATE-02 Your camera · Gate 1, one lane
Counts: Mixer truck arrivals · Counts events
Can: Count mixer trucks crossing the gate line, inbound.
Cannot: Say how much concrete a truck carried, or anything about a person.
Recording on 80 of 91 days, down 11 to 21 May. The count covers 88% of the quarter.
Accuracy: Precision 96.2% (93.9 to 97.6), recall 94.1% (91.4 to 96.0), from 418 movements labelled by your own team, 14 May. The labeller is the camera’s own party.
A reviewer or the lead, never the person who labelled it, accepts or withdraws this measurement under their own name. Accepting is not available in the demonstration.
CAM-YARD-01 Your camera · The block-stack bay
Counts: Pallets · Estimates a quantity
Can: Estimate pallets on the stack, divided by 0.919 because it reads about 8% low.
Cannot: Weigh the blocks, or anything about a person.
Recording on 91 of 91 days. Recording on 91 of 91 days.
Accuracy: Remaining spread GSD 1.047 (1.037 to 1.064), from 28 calibration pairs against Sandmarten Block Co (synthetic) delivery notes. Expires 2 June 2027 or when it moves.
Calibration pairs: 28; 25 are needed before accuracy can be measured.
A reviewer or the lead, never the person who labelled it, accepts or withdraws this measurement under their own name. Accepting is not available in the demonstration.
CAM-STORE-03 Your camera · Not described
Counts: Nothing yet · None
Can: Nothing until its view is described.
Cannot: Count anything.
Needs a view description before it may count anything.
Accuracy: Not measured yet, so this camera’s counts corroborate nothing.
Calibration pairs: 0; 25 are needed before accuracy can be measured.
What a camera or sensor can never give
- Composition by mass: refused at setup. Use the receiving facility’s records.
- Water chemistry: refused at setup. Use a laboratory sample.
- Air pollutant concentration: refused at setup. Use a stack or room analyser.
- Refrigerant leakage: refused at setup. Use the handler’s logbook and a weighed cylinder ticket.